LT1029ACZ
发布时间：2018/5/30
概述
The LT1029ACZ is a 5V bandgap reference intended for use in the shunt or “Zener” mode, allowing it to be used as either a positive or negative reference. The output is pretrimmed to ± 0.2% accuracy with 20ppm/°C maximum temperature drift. A trim pin allows additional output adjustment for even more precise output voltage.
Operating current range for the LT1029ACZ is 700μA to 10mA. Extremely low dynamic impedance allows excellent output regulation even with fluctuating operating current.
The LT1029ACZ will replace an LM136-5 or LM336-5 and simplify circuits using the “minimum temperature coefficient” trim network. The LT1029ACZ does not require this special network to meet its temperature drift specification; these application network components are simply removed. If output trimming is required for initial accuracy, the diodes in the trim network should be replaced with jumpers.
特点
0.2% Output Tolerance
0.6? Shunt Impedance
700μA to 10mA Operating Current
Pin Compatible with LM136-5
20ppm/°C Max. Drift
Output Voltage Trim does not Affect Drift
Can be Used as Positive or Negative Reference
Applications
A-to-D and D-to-A Converters
Precision Regulators
Precision Current Sources
V to F and F to V Converters
.jpg)
