LT1203CN8
发布时间：2018/7/28
概述
The LT1203CN8 is a wideband 2-input video multiplexer designed for pixel switching and broadcast quality routing. The LT1205 is a dual version that is configured as a 4-input, 2-output multiplexer.
These multiplexers act as SPDT video switches with 10ns transition times at toggle rates up to 30MHz. The ?3dB bandwidth is 150MHz and 0.1dB gain flatness is 30MHz. Many parts can be tied together at their outputs by using the enable feature which reduces the power dissipation and raises the output impedance to 10M?. Output capacitance when disabled is only 3pF and the LT1203CN8 peaks less than 3dB into a 50pF load. Channel crosstalk and disable isolation are greater than 90dB up to 10MHz. An on-chip buffer interfaces to fast TTL or CMOS logic. Switching transients are only 50mV with a 25ns duration. The LT1203CN8 and LT1205 outputs are protected against shorts to ground.
The LT1203CN8 are manufactured using LTCs proprietary complementary bipolar process. The LT1203 is available in both the 8-lead PDIP and SO package while the LT1205 is available in the 16-lead narrow body SO package.
特点
?3dB Bandwidth: 150MHz
0.1dB Gain Flatness: 30MHz
Channel-to-Channel Switching Time: 25ns
Turn-On/Turn-Off Time: 25ns
High Slew Rate: 300V/μs
Disabled Output Impedance: 10M?
50mV Switching Transient
Channel Separation at 10MHz: > 90dB
Differential Gain: 0.02%
Differential Phase: 0.02°
Wide Supply Range: ±5V to ±15V
Output Short-Circuit Protected
Push-Pull Output
Applications
Broadcast Quality Video Multiplexing
Picture-in-Picture Switching
Computer Graphics
Title Generation
Video Crosspoint Matrices
Video Routers
.jpg)
