LT1331CG
发布时间：2018/8/2
概述
The LT1331CG is a 3-driver, 5-receiver RS232 transceiver designed for 3V and mixed 3V/5V systems. Receivers operate from 3V logic supply VL, while the onboard charge pump and drivers operate from 5V or 3V supply VCC.
The transceiver has two shutdown modes. One mode disables the drivers and the charge pump, the other shuts down all circuitry except for one low power receiver which can be used for ring detection. The VCC supply may be shut down while in ring detection mode. While shut down, the drivers and receivers assume high impedance output states.
The LT1331CG is fully compliant with all EIA-RS232 specifications when VCC = 5V. If VCC = 3V, output drive levels are compatible with all known interface circuits. Special bipolar construction techniques protect the drivers and receivers beyond the fault conditions stipulated for RS232. The RS232 I/O pins are resilient to multiple ±10kV ESD strikes. An advanced driver output stage operates up to 120kbaud while driving heavy capacitive loads.
特点
RS232 Compatible 3V Operation
3V Logic Interface
ESD Protection Over ±10kV
120kbaud Operation for RL = 3k, CL = 2500pF
250kbaud Operation for RL = 3k, CL = 1000pF
One Low Power Receiver Remains Active While in Shutdown
60μA Supply Current in Shutdown
Low Power Driver Disable Mode
Uses Small Capacitors: 0.1μF, 0.2μF
CMOS Comparable Low Power: 60mW
Easy PC Layout: Flowthrough Architecture
Rugged Bipolar Design
Outputs Assume a High Impedance State When Off or Powered Down
Applications
Notebook Computers
Palmtop Computers
.jpg)
