概述

The ADP2311 is a fully integrated, dual output, synchronous step-down dc-to-dc regulator. The regulator operates from input voltages of 4.5 V to 18 V, and the output can regulate down to 0.6 V. Each channel can provide up to 1 A of continuous output current.

The ADP2311 integrates the high-side and low-side MOSFETs to provide a very high efficiency, compact solution. Both channels of the regulator run at 180° out of phase to reduce the input ripple current and the input capacitor size, thereby helping to lower system electromagnetic interference (EMI). The ADP2311 also integrates internal compensation and soft start circuitry to simplify the design.

An on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. Accurate voltage monitoring circuitry and a power fail comparator provide a controlled power-up and power-down sequence to enhance system reliability.

The ADP2311 also includes undervoltage lockout (UVLO), overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown (TSD).

The ADP2311 operates over the ?40°C to +125°C junction temperature range and is available in a 24-lead LFCSP package.

特点

Input voltage: 4.5 V to 18 V

±1.0% output accuracy

Integrated MOSFET: 110 mΩ/60 mΩ typical

Continuous output current: 1 A/1 A

Power fail comparator generates warning

Power-on reset with programmable delay timer

Adjustable voltage monitor for power-down (Channel 2)

Watchdog refresh input

Dual phase with 180° out-of-phase operation

Fixed switching frequency: 300 kHz

Internal compensation and soft start

Stable with low ESR output ceramic capacitors

Precision enable input

Power feedback during power-off

UVLO, OCP, OVP, and thermal shutdown protection

应用

Industrial and instrumentation

Healthcare and medical

DC-to-DC point of load applications